Unzip and copy contents into the root directory of a USB drive, power on the ArcDroid™ insert your USB drive into TFT screen. Press reset button. Simple Trace™ will be automatically upgraded.

Release Notes

Previous Version (2023-08-20a)

Simple trace 09-10a -French

Simple Trace 09-10a - Spanish

Simple Trace 09-10a - German

Unzip this file to the root directory of a Micro SD card Insert into your machine and turn the unit on. Firmware will be automatically upgraded.

Note: Micro SD card should be Less than 32GB and freshly formatted as FAT32

Release Notes

Previous Version

Basic Post Processor for Use with Fusion 360. Note "Tune" settings can override your Fusion Settings. Use Kerf=0 to ensure accurate
reproduction of CAM file.

Basic Post Processor for Use Vectric VCarve and Cut2D. "Tune" settings can override your V Carve Settings. Use Kerf=0 to ensure accurate reproduction of CAM file.

Basic Post Processor for QCAD/CAM. Unzip and save to the QCAD "postprocessors" directory on your computer

Basic Post Processor for Vectric CAM Software Such as Vcarve Cut2D. May require a false tool profile to operate correctly

Wanna look under the hood?

Detailed Operations Manual Provided by ArcDroid user Glenn Woodworth