CLEANER CUTS
The shielded tip design constrains the arc more tightly, producing a narrower kerf and noticeably less backside dross — especially on 14ga to 3/8" mild steel.
Razorweld RazorCut 45di + HYP 45A Hand Torch
$2,030.86
In stock — ships from our Canadian warehouse
- 3-Year Warranty
- FREE ArcDroid cable
- Ships from US
Ships from the United States
Complete your setup
-
ArcDroid™ CNC Plasma Robot
$3,249.00
Razorweld RazorCut 45di + HYP 45A Torch (19.5 ft)
ArcDroid-Ready • Plug-and-Play — Ships with built-in CNC/CPC port. Non-HF pilot arc for clean starts and zero EMI.
- Dual voltage 115/230 V with PFC
-
Cut: up to 1/2″ clean (230 V), 1″ sever
- Perforated/mesh mode keeps arc across gaps
What’s in the Box
- RazorCut 45di power source
- HYP-style 45A hand torch (19.5 ft)
- Ground lead, 115/230 V power cable, manual
Quick Specs
- Output: 20–45 A (230 V); 20–30 A (115 V)
- Duty cycle: 25% • OCV: 300 V • IP23S
- Air: ~3.5 CFM @ 65–75 psi (clean, dry air)
- Size/Weight: 21.5″×6.55″×13.5″ • 22 lb (≈32 lb boxed)
Ready to Cut?
$2,030.86
In stock — ships from our Canadian warehouse
$2,030.86
🔌 INCLUDES FREE ARCDROID CONNECTION CABLE — Plug & Play with ArcDroid right out of the box.
WHY THE HYP45 TORCH CHANGES EVERYTHING
LONGER CONSUMABLE LIFE
The shield cup protects the nozzle from molten spatter and blowback. Expect 2-3× longer tip life, fewer stops, and lower cost per cut over time.
HYPERTHERM COMPATIBLE
HYP45 consumables are cross-compatible with Hypertherm Powermax45 parts — the most widely available plasma consumables on the planet. Amazon, your local welding supply, anywhere.
Specifications
Tech Specs
Razorweld Razorcut 45DI · Model CUT45PFC · US Version
| Arc Start | Pilot arc (non-high frequency) — CNC safe |
|---|---|
| Max Output | 45A @ 230V · 30A @ 115V |
| Clean Cut (Steel) | 1/2" @ 230V · 1/4" @ 115V |
| Severance Cut | 1" @ 230V · 3/8" @ 115V |
| Current Range | 20–45A (230V) · 20–30A (115V) |
| Duty Cycle | 25% @ 45A |
| Input Voltage | 95–265V AC auto-sensing |
| Input Draw | 23A @ 230V · 31A @ 115V |
| Input Power | 5.3 kVA @ 230V · 3.6 kVA @ 115V |
| Air Pressure | 65–75 PSI (4.5–5.0 bar) |
| Air Flow | 3.55 CFM (100 L/min) |
| Torch | HYP45 shielded hand torch · 19.5ft lead |
| CNC Interface | 9-pin aviation socket (front panel) |
| Cutting Modes | 2T continuous · 4T continuous · Mesh (perforated) |
| No-Load Voltage | 300V DC |
| Power Factor | 0.99 (PFC) |
| Smart Fan | Yes — on-demand temperature sensing |
| Weight | 22 lbs (unit) · 32 lbs (shipped) |
| Dimensions | 21.5" × 6.55" × 13.5" |
| Protection | IP23S · Overheat · Overcurrent · Overvoltage |
| Certifications | CSA (US & Canada) · EN60974-1 |
| Warranty | 3 years (power source) |
Cutting Speeds
45A @ 230V — speeds in inches per minute
| Thickness | Mild Steel | Stainless | Aluminum |
|---|---|---|---|
| 16ga / 1mm | 312 | 228 | 228 |
| 3/16" / 5mm | 48 | 38 | 38 |
| 3/8" / 10mm | 28 | 20 | 20 |
| 5/8" / 15mm | 16 | 8 | 8 |
Speeds approximate. Results vary with material condition, air quality, and consumable wear. Set ArcDroid feed rate to match.
Torch Comparison
HYP45 vs. Stock J45XC
| Feature | HYP45 Torch | J45XC Stock Torch |
|---|---|---|
| Included With | DI Bundle — shielded, 19.5ft lead | Standard Razorcut 45 (non-DI) |
| Nozzle | Shield cup protects nozzle from spatter | Unshielded nozzle — exposed to spatter |
| Consumable Life | 2–3× longer consumable life | Shorter consumable life |
| Cut Quality | Cleaner cuts with less dross | More dross on cuts |
| Consumables | Cross-compatible with Hypertherm Powermax45 consumables | Proprietary consumables only |
Compatible consumables: Hypertherm Powermax45 shielded nozzle & electrode — widely available and cost-effective.
In the DI Bundle
HYP45 Shielded Torch — 19.5ft lead
Get cutting with ArcDroid right out of the box. Includes upgraded HYP45 torch and FREE connection cable.
- Shield cup protects nozzle from spatter
- 2–3× longer consumable life
- Cleaner cuts with less dross
- Cross-compatible with Hypertherm Powermax45 consumables
Support
Frequently Asked Questions
How do I connect to ArcDroid?
One cable. Plug the included 9-pin cable from the Razorcut's CNC port into your ArcDroid. Mount the torch in the clamp. Done — ArcDroid controls the arc automatically.
What can it cut?
Any conductive metal — steel, stainless, aluminum, brass, copper. At 230V: 1/2" clean cut, 1" severance. At 115V: 1/4" clean cut, 3/8" severance.
What air supply do I need?
65–75 PSI, 3.55 CFM minimum. Most 20+ gallon shop compressors handle it fine. 30+ gallon recommended for regular CNC use. Built-in regulator and moisture filter on the rear panel. Use clean, dry air for best consumable life.
What's in the box?
Razorcut 45DI, HYP45 torch (19.5ft lead), one set of shielded consumables (installed), 13ft ground cable + clamp, 9-pin ArcDroid connection cable (FREE), dual-voltage power cord, built-in air regulator, manual.
What about the warranty?
3-year manufacturer warranty from Razorweld. Torch consumables are wear items — not covered, which is standard across all plasma brands. CSA certified.
HYP45 vs stock torch?
The stock J45XC is unshielded. The HYP45 adds a shield cup that protects the nozzle from spatter, giving you cleaner cuts, 2–3× longer consumable life, and less dross. HYP45 consumables are cross-compatible with Hypertherm Powermax45 parts.
Keep Building