I set up our ArcDroid with a Harbor Freight Titanium 45 Plasma Cutter, but we are finding that we need to change out the torch tips and electrodes WAY TOO OFTEN. Sometime only have a few cuts...
I set up our ArcDroid with a Harbor Freight Titanium 45 Plasma Cutter, but we are finding that we need to change out the torch tips and electrodes WAY TOO OFTEN. Sometime only have a few cuts...
Check out their video making Long Travel A-Arms for their 750cc Camper Build, using the ArcDroid Plasma Robot! Ethan is an AMAZING fabricator. https://youtu.be/E-8tWyPnfGg
ALL files on your USB must have a file extension of .gcode for it to show up on the list. example: gusset1.gcode The file extension cannot be .nc change the file name and it s...
Here's a LINK with hundreds of FREE Cut FIles for your Plasma Cutter! I just cut some of the WEBBED GUSSETS on mine. Came out great. https://www.langmuirsystems.com/fireshare/explore?page=1...
Great job! ai'm thinking of making a Single Arm Bracket to replace the two individual brackets that lock the quick connect to the ArcDroid. It seems very cumbersome manipulating the two brac...
Cut from Mild Steel, surface ground finish, countersunk holes with a 120deg countersink...
Not sure of the current status, but when I ordered ours, it took only about 2 weeks to receive directly from overseas via DHL.
Has anyone put together any sort of Quick Reference Chart for Cutting Speeds & Feeds (and amperage) they find to be good starting points for various metal thicknesses? Thanks! -Glenn
Thanks, bud! Andrew will have them on the site soon!
Check this out! I just found this site, while looking for "Plasma Cutting FONTS" to use for cutting Signs and other Text on our ArcDroid Plasma... It allows you to use ANY standard FON...
Check out this video, demonstrating the use of The Corner Wizard, which allows you to locate precise positions on your workpieces. https://youtu.be/-f-mgaNABeM
Hi, guys... Here's a VIDEO demonstrating the use of The Corner Wizard for ArcDroid. This will aid you in finding Edges, Corners, and Centers of existing items that you might want to cut new ...
I've been able to EDIT the "last feature" that I've entered into the control, but I can't seem to figure out how to EDIT any other previous feature. Is there a way to "page back" to edit prev...
Not sure if this is a similar issue that I've been running into or not, but I tried raising the Z to 2.5" in the middle of one of my programs, but the Z only went up to the "clearance height" that ...
For anyone that was wondering, DISPOSABLE LASAGNA PANS make great Water Trays! LOL I picked some of these up at the DOLLAR TREE store and they conveniently fit under my Northern Tool Plasma ...
@Tom Gudaitis You MUST have the ground clamp connected to the WORKPIECE. Connecting it to just the table does NOT WORK WELL as it might if you were Welding. We had a similar issue until...
@ANDREW Miller SO GLAD TO HEAR THIS!!!!!!! We are fighting the same battle... Not wanting to use outside software, if possible. Being able to import .dxf files would be KEY! &nbs...