I think that's about right. I think all are around 20, + or - a bit. As long as it's registering each hole, you're fine.If it's not registering all holes, try going into the command and enter G28K....
Posts made by Jason Burns
-
Calibration problemsposted in General Discussion
-
extra cut linesposted in General Discussion
hmmm...bizarre. You're using the correct post processor? And same units set in post and on arcdroid? ( inch or mm)
-
Custom Torch holderposted in Gallery
@ANDREW Miller Oh I've used those screws a couple times already...haha. Incredibly useful adjsutment. I meant in relation to Glenn's single arm quick connect idea.
-
LINK to some cool FREE Plasma CUT FILESposted in Tips and Tricks
The Langmuir forums are a great resource all the way around.
-
extra cut linesposted in General Discussion
Did you set Curf Width on the ArcDroid to 0.00?I forgot to on a file once, caused extra lines.
-
Custom Torch holderposted in Gallery
@GLENN WOODWORTH That could work, although I haven't found it to be that big an issue compared to possible clearence issues. I'll be interested to see what you come up with.
-
Custom Torch holderposted in Gallery
Now the torch can't help but be square to the work piece and much easier for fast consumable swaps.
-
Water Table buildposted in Gallery
Got the platform done to attach the Droid to the table. Worked out better than I thought, got it sloped back just the right amount so the arm moves flat across the material as it extends. Still a l...
-
Small Light Sign Cutsposted in Gallery
Just to update, putting flat spots on the stepper motor shafts has made a world of difference. With that issue solved I moved on to cut quality.The cut quality issues were actaully a problem with t...
-
Does it work with IKOCADCAM (it is a free cadcam for plasma)posted in General Discussion
@Zelimir Ikovic Awesome! Just installed and can't wait to try it out. Thank you!
-
Does it work with IKOCADCAM (it is a free cadcam for plasma)posted in General Discussion
@Zelimir Ikovic email sent
-
Does it work with IKOCADCAM (it is a free cadcam for plasma)posted in General Discussion
@Zelimir Ikovic I was messing around with this a bit last night. I can see how it would be great for certain quick designs and layout, especially of multiple pats, once I get used to using it. If n...
-
Small Light Sign Cutsposted in Gallery
@ANDREW Miller Thanks for that Andrew. That video was made before I was able to sort out where exactly the problem was and repeated attempts to redo calibration had failed. All good now though.&nbs...
-
Small Light Sign Cutsposted in Gallery
@GLENN WOODWORTH This was all Fusion 360. Sometimes, depending on desired effect, I'll use Inkscape and export an SVG and finish it out in fusion.
-
Small Light Sign Cutsposted in Gallery
I did a quick design experiment cutting letters a different way and made a small light sign which I never completely finished out. The droid had some issues, my test cut looked perfect but somewher...
-
Water Table buildposted in Gallery
If anyone's interested, I put together a video of the water table build, which is mostly me butchering some aluminum and laying down some garbage tig welds 😃 Some day I'll get good at this.
-
Does it work with IKOCADCAM (it is a free cadcam for plasma)posted in General Discussion
Might have to try it out. Looks like very useful software.
-
iMac won't unzipposted in General Discussion
If that error is coming up on the iMac I wouldn't know right off where to direct you. I've only rarely used anything apple except when forced to. Sorry.
-
iMac won't unzipposted in General Discussion
Sounds like you have unzipped it. The .bin file is what you put on the USB or microSD.
Search
Latest topics
Forum statistics
- Topics:
- 81
- Posts:
- 378
- Members:
- 123
Newest members
Most liked authors
-
-
Jason Burns
25 -
-
