Broken switch. Send one my way please.
I suspect most of the handheld torches will need to have the cable held in your hand to manage the strain? Or an elaborate overhead tether?
Posts made by Jim Leisring
-
Printer Halted Kill() calledposted in General Discussion
Same. I was testing 2" squares and it was more like a parallelogram, so I calibrated again. The squares were much better but still had one side that was at an angle, so I calibrated again, and thi...
-
Printer Halted Kill() calledposted in General Discussion
Emailed Andrew on this but posting here in case anyone has more info. I press Home and it moves quickly/aggressively into the switch then stops itself.
-
Calibration resultsposted in General Discussion
Error:3.091 Result: Bad Does this mean we need to do the calibration process again? The bottom message says "Press Next to apply the settings"
-
Manual height control (turn off THC)posted in General Discussion
Ha... was just talking about this today. Good tip!
-
Forum design :(posted in General Discussion
It is better. I'll check out mobile and see how that goes.
-
Control unit freezing up?posted in General Discussion
Is it a file from Etsy? I was looking at a tank hook file there. Post the link to the file and I'll try it.
-
Ports?posted in General Discussion
What's up with the USB and SD ports on the side of the 'droid? Aux1 and Aux2 on the rear?
-
Forum design :(posted in General Discussion
One more... When we submit a post, we should not have to click "OK" telling us the post was approved.
-
DHL followed directionposted in General Discussion
Hi Kevin! Mine was a perfect box as well with no damage outside or in. Respectable job on packaging. Been playing with it on the kitchen island testing calibration steps, the tracing functions, e...
-
Control unit freezing up?posted in General Discussion
Did the calibration write to the USB OK? I had one USB it didn't like and another that is working OK (I haven't loaded a fusion file though).
-
Custom tableposted in General Discussion
@Tom Gudaitis I ordered the same table from Jegs that was quite a bit cheaper. I order a lot from Eastwood but many of their items are identical to what all the others have and they all put their s...
-
Table offset changes as arm extendsposted in General Discussion
Is this where THC will help when it is ready?
-
Forum design :(posted in General Discussion
Can we get this color scheme changed? This is very hard to read and even worse on a mobile device.
-
Beware of DHLposted in General Discussion
Same. No DHL signature. At least I was sitting right next to the door.
-
Everlast PowerPlasma 52i Settingsposted in Tips and Tricks
I like this. A getting started chart that we could print out would be helpful. Like the chart on the MIG welders that give some suggested settings.
-
Custom tableposted in General Discussion
I like it. My first try will be 2 identical 2x3 carts that can be moved around or placed together. One can hold the 'droid and the other can be cutting space. The 'droid will store on the lower she...
-
'droid has landed in Chandler Arizona!posted in General Discussion
Nice! Got my shipment notice today. Looking forward to getting it up and running.
Search
Latest topics
Forum statistics
- Topics:
- 81
- Posts:
- 378
- Members:
- 123
Newest members
Most liked authors
-
-
Jason Burns
25 -
-
